| X200 Technical Specifications
|
|
| ★ Inspiration Source
|
50 kV 200 uA 4W Rh target X -ray tube
|
| ★ Detector
|
Large-area SDD detector.
|
| ★Standard Block
|
3.16 standard fast energy calibration.
|
| Analyzing the environment
|
Ambient temperature: -20 ℃ to 55 ℃ , Ambient humidity: 10% to 90 %
|
| ★ External dimensions:
|
Dimensions: 185 x 114 x 267 mm. Weight: <1.4 Kg . No external support is required; the instrument can be placed directly upside down on a horizontal surface, making testing easier.
|
| Cooling system
|
The instrument employs a Peltier constant temperature cooling system, allowing the controller to operate at -35℃, ensuring the instrument's detection accuracy and preventing it from being affected by external temperatures .
|
| Configuration elements
|
Mining ore types include, but are not limited to, Mg, Al, Si, P, S, K, Ca, Ag, Sn, Sb , Ba , Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Rb, Zr, Nb, Mo, W, Ta, Au, Hg, Pb, Bi, U, etc.
Soil soil model: La , Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Rb, Zr, Mo, W, Tl, Hg, Pb, Bi, Mg, Al, Si, P, S, Ag, Cd, Sn, Sb, Ba
|
| filter
|
It is equipped with 6 filters that can automatically switch according to different voltages , and different elements use different filters to produce the best analysis results .
|
| monitor
|
3.5 -inch high-definition color capacitive touchscreen
|
| ★ Camera & Collimator
|
The instrument has a built-in high-definition color camera, enabling users to accurately observe and photograph the areas to be analyzed. It also features a built-in small-dot collimator that can focus the X-ray beam into a spot with a diameter of ≤3mm, allowing for direct aiming and testing of slits/spots, resulting in better detection of small samples.
|
| ★ Operating System
|
Android smart operating system
|
| memory card
|
16 GB storage
|
| Data format
|
CSV and PDF formats
|
| Data transmission
|
Bluetooth, USB port or Wi-Fi wireless
|
| Main unit power supply system
|
Two lithium batteries provide a usage time of no less than 8 hours .
|
| Testing software
|
Alloy- specific testing software
|
| Automatic diagnostic and fault reporting functions
|
Machine faults can be diagnosed and software upgraded remotely via the Internet; remote hardware upgrades are also possible.
|
| Detailed Packing List
|
||
|
1)
|
Handheld XRF analyzer
|
One handheld XRF analyzer main unit
|
|
2)
|
Waterproof, rugged carrying case
|
One waterproof shipping box
|
|
3)
|
USB Data transfer cable
|
One USB communication cable
|
|
4)
|
2 Li-ion batteries
|
Two 14.4V rechargeable lithium batteries
|
|
5)
|
Battery charger
|
1 set of battery charger
|
|
6)
|
Kapton film window kit
|
One set of protective film for the inspection window (for backup)
|
|
7)
|
Operation manual
|
One instruction manual
|
|
8)
|
Analysis software Recovery USB flash disk
|
Analysis software backup USB drive
|
|
9)
|
Alloy standard sample
|
Alloy Standard Sample 3: 16 Stainless Steel
|
|
10)
|
Special screwdriver
|
1 special tool
|
|
11)
|
Note
|
One copy of usage instructions
|
|
12)
|
I nstallation acceptance list
|
Two installation acceptance forms
|
|
|
|
|
| Analysis software package
|
||
|
1)
|
Mining Mode
|
Ore Analysis Mode
|
|
2)
|
Soil Mode
|
Soil analysis model
|
